Excellent service from start to finish! Very professional, transparent and reliable throughout the whole process. Everything was explained clearly, communication was great, and the work was carried out to a high standard. It’s refreshing to deal with a company that takes pride in its work and genuinely cares about its customers. Great value for money as well. Would highly recommend K&T Maintenance London to anyone looking for a trustworthy and professional service.

Free Quotes From Photos
Shower Repair in Edmonton
Shower repair in Edmonton for weak flow, water that swings hot and cold, and trays that leak into the room below. Send a photo on WhatsApp for a free quote, and we give you a clear fixed price before any work starts.
Get a Free Quote
12-Month Workmanship Guarantee On Every Shower
15 Years' Experience Led by Mustafa
Fully Insured to £2 Million On Every Job
Finding the Fault
How We Get a Shower Working Again
A shower that has gone weak, cold or drippy usually has one worn part behind it. Shower repair in Edmonton starts with finding which one, so the engineer checks the head, the hose, the valve and the pipes feeding it.
Showers are one of the regular plumbing jobs we take on, from mixer valves to trays, wastes and seals. Worn thermostatic cartridges, valve washers and seals are swapped for parts that fit your valve.
Where a valve is past saving, we fit a new thermostatic bar mixer, like the one in the photo. Then we run it at full flow to check the temperature holds. Before we leave, we check every joint and seal for leaks.
Hard water in North London leaves limescale in shower heads, hoses and valve filters. A lot of weak showers we are called to come down to scale, not a broken part.

What Goes Wrong
Shower Problems and How We Fix Them
Most shower faults show up in one of a few ways, whatever type of mixer you have. Here is what each one usually means and what we do about it.
Weak or Patchy Flow
The water comes out in a dribble, or sprays from the head at odd angles.
We descale or replace the head and hose, and clean the filters inside the valve.
Running Hot and Cold
The temperature jumps when a tap is used or the toilet is flushed.
We replace the thermostatic cartridge so the valve holds a steady temperature.
Dripping After It Is Off
Water keeps dripping from the head long after the shower is turned off.
We replace the worn cartridge or washer inside the valve.
A Leaking Tray or Enclosure
Water on the bathroom floor after a shower, or a stain on the ceiling below.
We reseal or replace the tray, waste and seals, and repair any rotten floor underneath.
No Hot Water at the Shower
The hot taps run hot, but the shower stays cold.
We check the valve and the hot supply to it, and fix the part that is stopping it.
Stiff or Broken Controls
A handle that won't turn, spins round freely or has snapped off.
We fit a new handle or cartridge to match, or a new valve if parts are no longer made.
Hidden Damage
When Water Gets Under the Shower Tray
A failed seal or a cracked tray lets water run under the shower every time it is used, often for months before anyone notices. By then the floor below can be soft and rotten.
On the job in these photos, the old tray came out to show black, soaked timber. Our engineer cut out the rot, laid new board, fitted a new quadrant tray and refitted the doors with fresh sealant.
Upstairs bathrooms sit on timber joists, so a slow leak under a tray can spread into the ceiling below before it shows.
Catching it early saves a lot of work. A dark line in the sealant, loose tiles at the base or a damp smell in the bathroom are all worth a call. Whenever we replace a tray, we check the floor under it first.

Upgrades
Fitting a New Shower
When a repair no longer makes sense, we fit a new shower and connect it properly to your hot and cold supply. Wet rooms and full bathroom refits are a separate service.
Thermostatic Bar Mixers
A neat bar valve on the wall that holds the temperature steady, with a riser rail and handset or a fixed head.
Concealed Valves
The valve sits inside the wall with just the controls showing, for a clean finish in a new or refitted bathroom.
Trays and Enclosures
New quadrant or square trays, wastes and enclosures, sealed to the tiles and tested before the doors go on.
Over-Bath Showers
A mixer with a handheld shower or riser rail fitted over your bath, with a screen or rail to keep the water in.
Shower Heads and Hoses
New heads, hoses and riser rails fitted to your existing valve, which is a quick fix for weak flow from a worn or scaled head.
Like-for-Like Valve Swaps
When an old valve has failed, a new one can often go on the same pipe positions, so the wall around it needs less disturbing.
Call Us Today
When a Shower Fault Can't Wait
Weak flow or a dripping head can wait for a booked visit. These are worth a call the same day, before more damage is done.
- Water coming through the ceiling below the bathroom
- A shower that suddenly runs scalding hot
- Water leaking from the valve or the pipes behind it
- A tray that has cracked or moves when you stand in it
- Water on the floor every time someone showers
Real Google Reviews
Trusted by Local Homeowners
Every review here is real and copied word for word from our Google profile.
Reasons to Choose Us
What You Get When You Call KTA Plumbing & Drainage
Homeowners choosing a plumber in Edmonton want someone who turns up, fixes it properly and charges a fair price. Here is what that looks like with our team, on a small tap repair or a full bathroom.

Emergency Call-Out Within 1 Hour
Burst pipe, flood or no water? We are available 24/7 for emergencies across Edmonton and North London.
Call 020 4569 1617Emergency Call-Outs, 24/7
Available 24/7 for emergencies. For a burst pipe or a flood, we aim to be with you within the hour.
Specialist Drainage Kit
Specialist drainage equipment and CCTV cameras, so a blockage is cleared at the source and you can see what is inside the pipe.
Clear Fixed Quotes
Send us photos on WhatsApp or through the form and we will give you a free quote. You get a clear fixed price before any work starts.
12-Month Workmanship Guarantee
Every job comes with a 12-month workmanship guarantee. If our work isn’t right within that time, you are covered.
Fully Insured to £2 Million
We carry £2 million public liability insurance on every job, in homes and commercial properties alike.
Clean, Tidy and Tested
We keep your home clean and tidy while we work, and every job is tested before we leave.
How It Works
From First Call to a Tested Job
Five simple steps, the same on every job. You know what we are doing and what it costs before any work starts.
Get in Touch
Ring the team, WhatsApp a photo or send the form with the problem and your postcode. A photo helps us understand the job quickly.
We Take a Look
Small jobs can often be priced from your photos. Bigger jobs and emergencies get a visit, so we can see exactly what is needed.
A Fixed Price First
You get a clear fixed quote before any work starts, so you know the price up front and can decide in your own time.
The Work, Done Properly
Our team carries out the work with the right kit for the job and keeps your home clean and tidy while we are there.
Tested Before We Leave
Everything is tested before we go. We show you what was done, and the work is covered by our 12-month workmanship guarantee.
Talk to the Team
Need Shower Repair in Edmonton?
Send a photo of the shower and the valve on WhatsApp for a free quote, or call the team. We cover Edmonton, Southgate, Chingford and the towns around them.
- Available 24/7020 4569 1617
- WhatsAppSend us a photo
- Email usinfo@ktaplumbingdrainage.co.uk
Address70 Bounces Rd, London N9 8JS
Request a Free Quote
Common Questions
What to Know About Shower Repair in Edmonton
Weak flow, changing temperatures, leaking trays and new showers.
Why has my shower gone weak?
Most often it is limescale in the shower head, the hose or the valve filters, which North London's hard water builds up quickly. A kinked hose or a worn cartridge can do it too. Shower repair in Edmonton usually sorts weak flow in one visit.
Why does my shower keep changing temperature?
Usually the thermostatic cartridge is worn or clogged with scale, so it can no longer balance hot and cold. When someone runs a tap or flushes the toilet, the shower then swings. A new cartridge normally fixes it.
Can you repair a leaking shower tray?
Yes. We find whether the water is coming from the seal, the waste or a crack, then reseal or replace the tray. If water has rotted the floor underneath, we repair that too and give you a fixed price for the work first.
Do you fit new showers?
Yes. We fit thermostatic bar mixers, concealed valves, trays and enclosures, and over-bath showers. Send a photo of the bathroom on WhatsApp for a free quote, and the fixed price comes before any work starts.
Is it the boiler if the shower has no hot water?
Not always. If the taps run hot but the shower doesn't, the fault is usually in the shower valve, and that is a shower repair in Edmonton we can sort. If there is no hot water anywhere, the boiler is more likely, and our engineers handle that as a boiler repair.
What guarantee comes with a shower repair?
A repaired shower or a new one comes with our 12-month workmanship guarantee. Every shower is run and checked for leaks before we leave, and the bathroom is left clean.
Where We Work
From Edmonton to North London, Essex and Hertfordshire
Need a plumber in Edmonton or further out? Our team travels up to 25 miles from Edmonton, across North London, Essex and Hertfordshire. If you are not sure your street is covered, call and ask.
- North London
- Essex
- Hertfordshire
- Edmonton
- Enfield
- Tottenham
- Muswell Hill
- Winchmore Hill
- Southgate
- Wood Green
- Chingford
- Walthamstow
- Waltham Cross
- Cheshunt
- Waltham Abbey
- Loughton
- Potters Bar
- Woodford
- Barnet
- Romford








